OPERATION 15
• Frost protection digital meter
When the device performs a lower temperature cycle due to opened window, a
meter appears on the display to show the cycle time.The counter is automatically
reset the next time Frost protection by opened window is activated (automatic or
manual activation).
5 sec.
• Stop the Frost protection mode
By pressing one button, you stop the Frost protection mode.
Note: if a temperature rise is detected, the device may return to the previous
mode (active mode before the open window detection).
9.
INFORMATION ABOUT PRIORITIES BETWEEN THE DIFFERENT MODES
• Principe
In Comfort, Eco and Frost protection modes, only orders of the open window
sensor will be considered.
In Auto mode, the device can receive different orders coming from :
- 7 day and daily programming integrated (Comfort or Eco orders);
- Open window detector
In general, it is the lowest received order which prevails.
In case of programmed Boost, the Boost activation will take precedence
over others orders received the device will switch off and the Boost will
be not activated.
• Examples
7 day and daily programming = Eco
+
Open window detector = Frost protection
= Frost protection
FR
NL
DE
IT
EN
PL
FR
NL
DE
IT
EN
PL
To Next Page
Loading...
Need help?
General