06 OPERATION
Mode overview Display
•
Auto mode
In Automatic Mode, the device will
automatically change from Comfort mode to
Eco mode according to the established
programme.
3
3 different cases depending on your set-up:
1
7 day and daily programme
Your device has been programmed and is executing Comfort and Eco mode
orders in line with the settings and time periods you have selected
(see page 9 for more info).
2
Programming by pilot wire (only for France)
3
Without programme
if the 7 day and daily programme is not enabled or no orders are being sent by
pilot wire, then your device’s factory settings mean that it will operate in
nonstop Comfort mode, 7 days of the week.
•
Comfort mode
Non-stop Comfort mode. The device will
operate 24 hours a day to achieve
the temperature which has been set (e.g.
19°C). The Comfort mode temperature level
can be set by the user.
You can access the Comfort temperature set
up from the Auto and Comfort Mode. It is pre-
set to 19°C.
Using and you can adjust the
temperature from 7°C to 30°C by intervals of
0.5° C.
• Eco mode
Eco, which means the Comfort Mode tempe-
rature minus 3.5°C. This enables you to lower
the temperature without having to reset the
Comfort Mode temperature.
Select this mode for shortterm absences
(between 2 and 24h ) and during the night.
To Next Page
Loading...
Need help?
General