Vaughan Junior - Irrigator Setup Information; Irrigator Hose Layout Guidelines; Essential Assembly Tools

Hose
When choosing a hose for your Vaughan Irrigator, we recommend and supply heavy duty, abrasion
resistant lay at irrigator hose. Lay at is recommended over poly pipe as poly easily kinks. If this
happens, the kinked pipe will need to be cut and rejoined. When towing your lay at, use a skid to
prevent tangles.
Hydrant
The ideal location for the supply hydrant is in the middle of the irrigator run - see drawing below.
We recommend the following tools to assemble your irrigator.
• 2 x Pipe Wrenches
• Set Open End Spanners
• Adjustable Shifter
• 600mm Spirit Level
• Teon Tape
Irrigator Hose Layout
(Applicable to all Models)
Assembly Tools
(Applicable to all Models)