178 Driving and operating
The area displayed by the rear view
camera is limited. Displayed images
may be further or closer than they
appear.
The system automatically selects the
best view to display according to the
information from the parking sensors.
The state of the system is not kept in
memory when the ignition is switched
off.
Activation
The rear view camera is activated
when the reverse gear is engaged.
Functionality
Different views can be selected in the
left part of the display.
Change the type of view at any time
during a manoeuvre by selecting the
required view from the view selection
in the left part of the Info Display:
● Standard view
● 180° view
The display is immediately updated
with the type of view selected.
Using the camera, the vehicle's close
surroundings are recorded during low
speed manoeuvres. An image from
above the vehicle in its close
surroundings is created in real time
(on the side of the screen), as the
vehicle progresses. This view makes
it easier to align the vehicle when
parking and to perceive nearby
obstacles. It is automatically deleted
if the vehicle remains stationary for
too long.
Standard view
The area behind the vehicle is
displayed in the screen. The vertical
lines represent the width of the
vehicle with mirrors unfolded. The
direction of the lines changes with the
steering angle.
The first horizontal line represents a
distance of about 30 cm beyond the
edge of vehicle's rear bumper. The
upper horizontal lines represent
distances of about 1 m and 2 m.
This view is displayed automatically
or can be chosen from the view
selection.
Trajectory lane of the vehicle is
shown in accordance with the
steering angle.
180° view
The 180° view facilitates reversing
out of a parking bay, making it
possible to see the approach of
vehicles, pedestrians and cyclists.
This view is not recommended for
carrying out a complete manoeuvre.
Zoom view
The rear view camera records the
vehicle's surroundings during the
manoeuvre in order to reconstruct a
view from above the rear or the front
of the vehicle in its near surroundings.
An image from above the vehicle in its
close surroundings is created as the
vehicle progresses. Thus, the vehicle
can be manoeuvred around obstacles
nearby. Zoom view cannot be
manually selected. It is automatically
activated if the distance between the
vehicle and the obstacle is approx.
60-80 cm.