236 Vehicle care
wheel for temporary usage, the
bolts for alloy wheel rims can also
be used.
Depending on the wheel rim material,
two different bolts are available.
Tightening torque for alloy wheel rims
is 115 Nm.
Tightening torque for steel wheel rims
is 115 Nm.
Use the correct wheel bolts for the
respective wheel rims.
Jacking positions
The jacking positions shown refer to
the use of lifting arms and accessory
jacks used for changing winter /
summer tyres.
The rear arm position of the lifting
platform is centrically under the
relevant vehicle jacking point.
The front arm position of the lifting
platform is centrically under the
relevant vehicle jacking point.
Spare wheel
The spare wheel can be classified as
a temporary spare wheel depending
on the size compared to the other
mounted wheels and country
regulations. In this case a permissible
maximum speed applies, even
though no label at the spare wheel
indicates this.
If there is a label on the spare wheel,
the permissible speed still depends
on the country regulations.
To Next Page
Loading...
