188 Vehicle care
Right-hand side
1. Remove the storage door and the
tyre repair kit.
2. Remove the cover.
3. Turn and lane-change signal light
(1)
Back-up light (2)
4. Remove bulb holder. Remove
and renew bulb.
5. Insert bulb holder into the tail light
assembly. Install tail light
assembly in body and tighten.
Close covers and engage.
6. Switch on ignition, operate and
check all lights.
Number plate light
1. Prise the light out with a
screwdriver.
2. Remove bulb housing
downwards, taking care not to pull
on the cable.
Rotate bulb holder anticlockwise
to disengage.
To Next Page
Loading...
