66 Storage
3. Position the bicycles on the rear
carrier system alternately aligned
to the left and to the right.
4. Align the bicycles with the one
attached previously. The wheel
hubs of the bicycles must not
touch each other.
5. Attach the bicycles with mounting
brackets and strap retainers as
described for the first bicycle. The
mounting brackets should be
fixed in parallel.
Use the long mounting bracket to
attach the second bicycle to the
rack.
Use the short accessory mounting
bracket to attach the third bicycle.
The bracket must be fixed
between the frames of the second
and third bicycle.
6. Additionally, secure both bicycle
wheels of the third bicycle to the
wheel recesses using the
tensioning straps.
It is recommended to attach a
warning sign to the rearmost bicycle,
to increase visibility.
Fold the rear carrier system
backwards
The rear carrier system can be folded
backwards to gain access to the load
compartment.
● Without attached adapter:
Push the lever (1) to disengage
and hold it.
To Next Page
Loading...
