Pairing Two Devices
You can pair the VAVA Voom with two devices at the same time. Although only one of them can play music at any time,
you can easily switch devices without going through the pairing process again. To pair with two devices:
1. Follow the “Bluetooth Pairing” instructions to pair the VAVA Voom with the first device.
2. Turn off the Bluetooth function on the first device, VAVA Voom will switch into pairing mode automatically.
3. Pair the second device with VAVA Voom.
4. Turn on the Bluetooth function on the first device and select “VAVA Voom”, now both devices are paired
with the VAVA Voom.
5.To switch between the two devices, pause the music on one device and start playing on the other.
Bluetooth Pairing
To pair with any Bluetooth device:
1. Power on the speaker by pressing and holding the power
button for 2 seconds.
2. Wait for the Bluetooth indicator to start flashing.
3. Turn on the Bluetooth function from your device and search
for nearby connections.
For iPhone: Settings > General > Bluetooth > On
For Android: Settings > Bluetooth > On > Scan for devices
4. Select VAVA Voom from the search results and tap to connect.
5. The Bluetooth indicator will become white to indicate a
successful connection.
6. If a pass code is required, please use “0000”.
3 LEDs
2 LEDs
1 LED
67 – 100% battery
33 – 67% battery
1 – 33% battery
Note: When the battery level is low, the VAVA Voom will start beeping.
Charging Smartphones
You can charge your mobile phone by connecting it to the VAVA
Voom using the USB cable supplied with your phone. Press the
power button to start charging.
03
Battery Level
To Next Page
Loading...
Need help?
General
