Taking care of your machine
Switch o your vacuum cleaner
at the main socket. Using a pair
of scissors cut any hair or debris
free from around the brushbar.
Removing debris from the brushbar
A RED light will indicate
a jammed brushbar.
Changing the brushbar
Using a crosshead screwdriver,
remove 3 screws from the side
of the oorhead.
Remove the end cap belt cover. Pull to remove the brushbar location
plate. Remove belt.
Lift and separate brushbar side cover.
Pull brushbar through brushbar
side cover to remove.
PULL
CAUTION: To reduce the risk of electric shock, turn the vacuum cleaner o and unplug from the electrical outlet before
performing maintenance/troubleshooting checks.
IMPORTANT: Unplug and switch o vacuum cleaner before maintenance or troubleshooting checks.
Turn the vacuum cleaner back on.
A
GREEN light will indicate that the
brushbar is clear and ready for use.
To Next Page
Loading...
Need help?
General
