Vax Air3 Agile - Looking after Your Machine - Filters

8vax.com.au
Looking After Your Machine – Filters
Looking After Your Machine –
Emptying & Cleaning Dirt Container
Cleaning the HEPA post-motor  lter
T
A
P
Remove the post-motor  lter from the body of the vacuum cleaner.
Cleaning the pre-motor  lter
Turn the dirt container lid anti-clockwise to remove.
24hr
MAX
40˚C
!
MAX
40˚C
4
4
TAP
IMPORTANT: Water temperature should not exceed 40°C when washing pre-motor  lter.
IMPORTANT: Even with regular cleaning,  lters have a limited lifespan and will eventually need to be replaced
during the lifetime of the vacuum cleaner. If the performance of your vacuum cleaner is compromised and/or the
 lters are severely discoloured, the  lters may need to be replaced. As a general guide, Vax recommends  lters are
replaced every 3-6 months depending on the level of use to ensure optimum performance of your vacuum cleaner.
WARNING: Do not wash the post motor  lter.