7
Looking after your machine -
Removing Blockages
Removing debris from the TurboBrush (not standard on all models)
The brushbar will stop rotating if it becomes blocked. Using a pair of scissors, cut through any threads or hairs caught
around the brushbar.
WARNING: To reduce the risk of electric shock, turn the vacuum cleaner o and unplug from the electrical socket before
performing maintenance/troubleshooting checks.
IMPORTANT: If the air inlet, hose or telescopic tube is blocked, switch o the vacuum cleaner and remove the blockage(s)
before re-starting the vacuum cleaner.
Disconnect the hose from the vacuum cleaner and remove any blockages found then reconnect the hose securely.
To Next Page
Loading...
Need help?
General
