19
To test for a blockage in the reach wand or powered hose, drop a small ball of paper
into the wand/hose. The paper will drop through if the wand/hose is clear. Use a
broom handle or similar blunt object to remove any blockage.
Press the handheld release button and
remove the reach wand.
Check and clear any dirt and debris
from the handheld connection point.
Press the dirt container release button
and remove the dirt container.
Check and clear any dirt and debris
from behind the dirt container flap.
Check the powered floorhead for any
blockages and use a blunt object to
remove the blockage.
Cleaning and maintenance
Checking for blockages
To Next Page
Loading...
Need help?
General
