Cleaning the nozzle
If lint or other debris becomes lodged in nozzle, it can be removed for cleaning.
To replace nozzle, line up
tabs on nozzle with holes in
cleaner. Slide tabs into holes.
Press down on nozzle to
correctly will result in poor
water pick up.
Unplug cleaner from electrical
outlet. Remove the dirty
water tank, and lift the nozzle
removing it from cleaner
24
Rinse under water to
remove debris.
Allow to dry completely
before replacing or storing
away your machine
(24 hours).
15
Looking After Your Machine
To Next Page
Loading...
Need help?
General
