WARNING:
maintenance/troubleshooting checks.
Removing blockages from the brushes
Advanced Brush Maintenance
Locate and remove the Spinscrub brushes as described above.
Use a screwdriver to unclip both Spinscrub covers.
brushes can be cleaned under running water. Leave Spinscrub
hear a ‘click’ when they are correctly in place.
Each brush can be removed
and cleaned under running
water. Leave the brushes to
After cleaning, place the
individual brushes back and
clip the Spinscrub covers
back into place.
IMPORTANT: All water and solution must be removed from tanks before removing blockages from the brushes.
16vax.com.au
Looking After Your Machine
To Next Page
Loading...
Need help?
General
