WARNING: to reduce the risk of personal injury, unplug the vacuum cleaner
before performing maintenance/troubleshooting checks.
I
s there an accessory missing?
• Check the ‘Machine Overview’ page in this guide
to make sure the part is definitely included in your
u
nit.
• If it is missing, we’re here to help. Simply call us on
0
844 412 8455
Why won’t the vacuum cleaner pick up?
• The filters may be clogged: Refer to the
Maintenance sections (page 6).
• The dirt container is full or blocked: Refer to
the Maintenance sections (page 6).
• The dirt container may be incorrectly installed: Refer
to the Maintenance sections (page 6).
• The brushbar may be blocked. Refer to the
maintenance section (page 7).
Why is dust escaping from the vacuum?
• The filters may not be installed correctly. Refer to the
Maintenance sections (page 6).
• The dirt container may be incorrectly installed:
Remove the dirt container from the unit by pressing
the dirt container release button (page 6) and
reattach it to the unit, ensuring it is locked firmly
back into place.
• The filters may be clogged: Refer to the
Maintenance sections (page 6).
What do I do if an accessory/the unit becomes
damaged or broken?
• Visit vax.co.uk for parts and spares.
• Please call our Vax Careline to purchase new
spares or order a replacement:
0844 412 8455
W
hy won’t the accessories pick up properly?
•
The accessory may be blocked: Refer to the
Maintenance section (page 7).
•
The accessory may be faulty: please call our
V
ax Careline to order a replacement:
0
844 412 8455
Why will the vacuum cleaner not run?
• It may not be plugged into the electrical outlet
correctly. Ensure that the plug is pushed into the
electrical outlet securely.
• The electrical outlet may not be working. Check the
fuse or breaker and consult an electrician.
• The motor thermostat may have tripped. Switch off
and unplug the vacuum cleaner. Leave for one
hour before switching the vacuum cleaner back
on.
Why isn’t my brushbar rotating?
• The brushbar may not be turned on. Refer to the
operation section (page 7).
• The unit may not be reclined. Refer to the
operation section (page 4).
• The brushbar may be jammed. Refer to the
maintenance section for how to reset the
brushbar (page 7).
Why is there a red light on the nozzle?
• The brushbar may be jammed. Refer to the
maintenance section for how to reset the
brushbar (page 7).
• If the red light still shows, we’re here to help.
Simply call us on 0844 412 8455
To Next Page
Loading...
Need help?
General
