Vax Mach Air SERIES

---
8
FAQs
Vax Careline: (UK) 0844 412 8455
(ROI) 1-800 928 308
Removing blockages from the TurboTool and TurboTool+
(some models only)
Slide off the locking ring. Pivot lower housing and
remove clog.
To re-assemble, ensure that the
tabs are engaged and pivot the
lower housing closed. Slip the
locking ring into the groove at
the neck of the TurboTool to
complete reassembly.
Tabs
U89 U90 & U91-MA Mach Air UG V2.1(V7):User guide 18/03/2011 16:50 Page 8