Taking care of your machine
Hold the dirt container and twist the
lid anti-clockwise.
Cleaning the shroud
Lift the lid to reveal the
pre-motor lter.
Lift out the pre-motor lter.
Twist the separator cap anti-
clockwise to unlock and remove.
Lift and remove the separator from
the dirt container.
Tap the separator against a bin to
remove any dirt/debris.
Make sure the rectangular hole in
the dirt container lines up with the
rectangular hole on the separator.
Replace the separator cap,
twist clockwise to lock.
Replace the pre-motor lter. Close
dirt bin lid making sure it clicks and
locks into place.
TIP
For easier cleaning, follow the 3-Step Clean
process located on the back of the dirt container.
Don’t over ll the dirt container.
Replace the lters every 6-9 months.
To Next Page
Loading...
