Let’s talk technical
Slide the locking ring
to remove.
Lift and separate
the housing.
Using a pair of scissors,
cut any hair or debris free
from around the brushes.
Removing blockages from the TurboTool (some models only)
Tabs
Line up the tabs on front of
housing and push together
to ret. Slide locking ring
into groove to secure.
Post-motor lter maintenance
IMPORTANT: The exhaust lter is designed to oer long life with no maintenance. The lter should be checked
periodically and when heavily discoloured it should be replaced. Please do not wash, scrub or brush the lter
as this will damage the delicate lter media.
CAUTION: Do not wash the post-motor lter.
Post-motor lter is located in the
right side wheel. Hold the centre
of the wheel and twist wheel cover
anti-clockwise.
With the wheel cover o the
post-motor lter is easily removed.
Check the post-motor lter
for discolouration.
Removing blockages from the hose
Remove the hose from the vacuum cleaner
and telescopic extension tube. Insert a broom
handle or similar blunt instrument into the
hose to remove blockage.
TIP
To test for a blockage in
the hose, drop a small
ball of paper into the
hose. The paper will
drop through if the
hose is clear.
To Next Page
Loading...
