Vax PickUp Pet CVRAV013 - Taking Care of Your Machine; Emptying and Cleaning the Dirt Container; Cleaning the Pre-motor Filter

Taking care of your machine
Cleaning the pre-motor lter
Remove dirt container
by pushing down the dirt
container release button
and lifting the dirt container.
Hold the dirt container and
twist the lid anti-clockwise.
Tap the pre-motor lter
against a bin to remove
any dirt/debris.
Leave to dry for 24 hours or
until fully dry before placing
back in the machine.
Rinse the pre-motor lter
under water (max 40°C).
T
A
P
MAX
40˚C
!
MAX
40˚C
24hr
Lift the lid to reveal the
pre-motor lter.
Hold the dirt container over a
bin. Press the dirt release clip
at the bottom of the container,
the dirt release door will open
allowing dirt/debris to fall out.
Lift out the pre-motor lter.
Emptying and cleaning the dirt container
IMPORTANT: Always switch o and unplug the vacuum cleaner from the electrical socket before assembling,
opening or emptying the dirt container, or before connecting/disconnecting the attachments.
Check the pre-motor lter every time you empty the dirt container and tap against a bin to remove dirt/debris if
required.
The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will
automatically turn the unit o.