Vax Service line
AU: 1300 361 505 / NZ: 0800 800 90011
Maintenance
(
Keep your Vax as good as new
)
Clearing blockages
Clearing debris from the Turbo tool
WARNING: To reduce the risk of personal injury, unplug your multifunction cleaner before
performing maintenance/troubleshooting checks.
Hose blockages
Disconnect the hose from your machine.
Carefully remove any blockages found and
reconnect the hose securely.
Accessory blockages
Remove accessory from the hose or tube.
Carefully remove the blockage and return
to the cleaner.
WARNING: The brushbar on the Turbo tool / Turbo brush will stop rotating if it is blocked
or if anything is wrapped around it.
Removing debris from the Turbo brush
Remove wrapped threads.
Remove wrapped threads.
To Next Page
Loading...
Need help?
General
