Vax SpinScrub VSS7151 User Manual

Vax Service line
AU: 1300 361 505 / NZ: 0800 800 9007
Operation
Operating the appliance (carpet washing mode)
Washing carpets
Washing hard floors
Press red button
– power.
To put down water
and solution and turn
the brushes on,
push rocker switch
towards the back of
the floor head.
To put down water,
push the rocker
switch towards the
back of the hard floor
wash head.
Press green button
to activate pump.
To suck up excess
water push the rocker
switch to the front.
To suck up excess
water, push the rocker
switch to the front.
NOTE: For best results apply solution on the forward stroke and recover solution on the
backward stroke.
NOTE: Rinse out your carpet cleaning solution and fill the clean water tank with clean water
before washing your hard floors.

Vax SpinScrub VSS7151 Specifications

General

Brand	Vax
Model	SpinScrub VSS7151
Category	Vacuum Cleaner
Language	English