Using your machine
Remove water tank
and rell before use.
When using the handheld always attach the concentration
nozzle or hose. Push the concentration nozzle/hose onto
the handheld nozzle and twist clockwise to lock into position.
Lift the handheld release
button and gently pull the
handheld to release from
the steam mop.
Insert the handheld back into the machine until it clicks
into place.
Adjust the dial on the front of the handheld to desired
steam setting and push On/O button to switch on.
Using the handheld steamer
Larger accessories can be attached using the concentration
nozzle or hose. To attach the hose twist clockwise
until locked into position and secure. To remove hose,
turn anti-clockwise.
Small tools can be attached via concentration nozzle,
twist clockwise until locked into position and secure.
To remove concentration nozzle, turn anticlockwise.
Using small accessories Using large accessories
WARNING: Always switch o the handheld steamer before attaching the concentration nozzle and accessories.
To Next Page
Loading...
Need help?
General
