Vax VCW-02 User Manual

Vax VCW-02
4
preparing the machine
3. Preparing the Machine
WARNING: Use only Vax Commercial Carpet
Cleaner with this machine. Using other cleaning
solutions may cause excessive foaming. Excessive
foam will cause the float to shut off the vacuum
prematurely.
Filling Clean Water Tank
Press down on the Lid. Release Latch and tilt lid towards
front of cleaner to access the tanks (Fig.3/1).
Remove Clean Water Tank by pulling up and out of
cleaner (Fig.3/2).
Unscrew cap and fill Clean Water Tank with solution up
to the Soap Fill Line (Fig.3/3).
Fill the rest of the Clean Water Tank with warm tap
water (MAX 40°C) up to the Water Fill Line (Fig.3/4).
Replace Clean Water Tank cap and tighten firmly.
Return Clean Water Tank to cleaner (Fig.3/5). Close
lid making sure that the Lid Release Latch clicks into
place (Fig.3/6).
Fig.3/1
Fig.3/2
!
Fig.3/3
Fig.3/4
Fig.3/5 Fig.3/6

Vax VCW-02 Specifications

General

Brand	Vax
Model	VCW-02
Category	Vacuum Cleaner
Language	English