Taking care of your machine
Pull the foam lter to
separate and remove
from of lter frame.
Tap the lter over a bin to
remove any dust and
debris. Do not wash the
fi lter frame.
Pull to remove the
pre-motor lter out of
the dirt container.
Wash foam lter under
running water (max 40’C).
Leave for at least 24
hours or until fully dry
before replacing into
the machine.
24hr
Cleaning the terminals
Using a dry cloth or soft dusting brush, remove
any dust or debris from terminals on main body
and handheld.
CAUTION: For best performance all terminals must be free from dust and dirt.
To Next Page
Loading...
