Replacing and cleaning a blockage from the brushbar
CAUTION: If the brushbar has been obstructed, the Motor Protection Sensor may have been activated. Remove the
handheld from the main body and clear any obstruction from the brushbar. Wait 30 minutes for the vacuum cleaner
to reset itself. Return the handheld to the main body and retry.
Let’s talk technical
Cleaning blockages
CAUTION: Use a blunt instrument such as a broom handle or something similar when removing a blockage from
the main body or oorhead.
Place foot on the oor
head and pull the handle
backwards to recline the
main body.
Lift to remove the handheld
from the main body.
Press the handheld
release button.
Lift the main body o
the oor with the oor
head unlocked.
Use a blunt instrument such as a broom handle to clear
any blockage in the hose connecting to the oorhead.
Using a pair of scissors
remove any threads or
hair caught around the
brushbar.
To release the brushbar
pull and lift the release
lock located underneath
the oorhead.
Remove the brushbar
lifting the side of the
brushbar nearest the
release lock rst.
Replace the brushbar. Fit the
inverted round end of the
brushbar rst, then line up
and push the other side of
brushbar into the oorhead.
Re t the release lock.
To Next Page
Loading...
