Vax W85-PL-T Dual Power Pro Advance

Changing the brushbar
Lie carpet washer on its
back exposing SpinScrub
brushes and brushbar.
Use a crosshead
screwdriver. Undo 2
screws and remove
belt guard.
Firmly pull sides
of SpinScrub
cover and remove
SpinScrub brushes.
CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks.
Using a crosshead screwdriver remove the top and bottom screws from
each of the rug guards (metal pins) and remove to get access to the brushbar.
Let’s talk technical