VBM DOMOBAR JUNIOR DIGITAL - Alarms and Settings; Understanding Machine Alarms

23
1
1
1 2
1
1
1 2
1
1
1 2
ENG
8,
ALARMS AND SETTINGS.
8.1,
ALARMS.
FILLING TIME OUT ALARM
· In case of lack of water inside the boiler, the error code (E01)
appears on the display and the LED (1) lights up red.
· Remove the alarm by filling the water inside the boiler following
the operations described in the “First start-up” paragraph.
PROBE MALFUNCTION ALARM
· In case of probe malfunction, the code (E02) appears on the
display and the LED (1) lights up red.
· It will no longer be possible to carry out any operation and the
keys are disabled, turn off the machine and contact the Service
Centre.
EMPTY TANK ALARM
· When the water level in the tank drops below the minimum level,
the symbol (2) empty tank appears on the display and the LED (1)
lights up red.
· When the alarm symbol appears, all the keys will be deactivated
until the tank is filled as described in paragraph “Water load”.