7.3,
STA RT.
· Place the mains switch (1) to “ON”, the line lamp l(2) will
light and starts the water heating in the coffee boiler,
indicated by the lighting of the lamp (3).
· Wait until the boiler reaches the water temperature
indicated by the turning off of the lamp (3) at this point
the machine is ready for use.
· Set the switch (4) to ON to start heating the water in the
steam boiler, wait for the steam pressure to reach the
value of 1-1.2 bar before using both the steam nozzle of
the spear for hot water.
NEWManuale_DomobarJunior2B_Rev0_01-2016_5lingue.indd 20 17/03/16 17:21
To Next Page
Loading...
