EasyManua.ls Logo

VDO ECO LIGHT M30 - Product Installation and Operation; Mounting and Beam Adjustment; Mode Selection and Button Control; Battery Management

VDO ECO LIGHT M30
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Battery indicator / Akku Indikator / Indicateur de
batterie / Indicatore della batteria / Indicador de
batería / Batterij-indicator / Wskaźnik baterii
4
Indication / Indikation / Indication / Indicazione /
Indicación / Aanwijzing / Wskazanie
2
Installation / Montage / Montage / Montaggio /
Montaje / Montagem / Montage / Montaż
2
Mode / Modus / Mode / Modo / Modo / Modo /
Mode / Tryb
5
Charging / Ladevorgang / Charge / Ricarica / Carga /
Carregamento / Opladen / Ładowanie
ca. 3 h
30 – 0 %
Micro
5 V / 500
1000 mA
charger not incl.
Achten Sie bitte darauf, dass die rotmarkierte
Abdichtung stets korrekt verschlossen ist.
Please always keep the silicone plug closed
after charging.
Wenn die LED leuchtet, dann
umgehend aufl aden!
If light appears, please charge!
100 – 31%
1 x click = on / standard (30 LUX)
+ 1 x click = eco (15 LUX)
+ 1 x click = off
SCHALTER
BUTTON
Die Lichtverteilung darf nicht verdeckt sein!
Do not cover the rear light!
A B
Nach dem Ladevorgang
erlischt der Indikator.
The indicator will go
out after charging.
ECO LIGHT M30
Anbauhöhe der Frontlampe: min. 400 mm und max. 1200 mm
über der Fahrbahn. Stellen Sie die Fahrradlampe so ein,
dass andere Verkehrsteilnehmer nicht geblendet werden.
Der Scheinwerfer muss fest mit dem Rad verbunden sein und
die Lichtverteilung darf nicht verdeckt sein.
Mounting height for front light: min. 400 mm and max. 1200 mm
above the roadway. Adjust the front light so that other road users
are not dazzled. The headlight must be securely attached to the bike
and it must be ensured that the distribution of light is not obstructed.
!

Related product manuals