K
Kent RaySep 8, 2025
Why is guidance information not audible on my VDO MS 4100 Car Receiver?
- Aamanda13Sep 8, 2025
If guidance information is not audible, check if the volume is set to zero.
To Next PageTo Next PageWhy is guidance information not audible on my VDO MS 4100 Car Receiver?
If guidance information is not audible, check if the volume is set to zero.
What to do if my VDO MS 4100 Car Receiver navigation radio is not functioning and there is no display?
If your navigation radio is not functioning and there is no display, check the fuse (both in the unit and the vehicle) and verify all connections according to the installation instructions.
What to do if my VDO MS 4100 displays 'Temperature too high' and the volume is lowered?
If the display shows 'Temperature too high' and the volume is lowered, allow the device to cool down by setting a lower volume. Wait until the message disappears from the display.
What to do if my VDO Car Receiver displays 'Please insert CD' or 'Please insert correct CD'?
If the display shows 'Please insert CD' or 'Please insert correct CD', check that a suitable CD is inserted into the CD player with the label side facing upwards.
Why does my VDO MS 4100 Car Receiver system switch off the sound or display 'PHONE IN/MUTE' during driving?
If the system switches off the sound during driving or the display shows 'PHONE IN/MUTE', the speedometer signal may be connected to the wrong pin of the power supply connector. Refer to the pin setting ISO chamber A in the installation instructions.
What to do if the desired station cannot be set with automatic search on my VDO Car Receiver?
If the desired station cannot be set with automatic search, try the following: 1. Set the desired station manually (manual tuning) if the station is too weak. 2. Check if the antenna is completely extended and correctly connected. 3. Switch off the 'Traffic programme' or 'TMC' if they are enabled. 4. Check the 'Tuner Grid' option in the 'Radio' menu to ensure the tuner standard (tuner grid) is correctly set (EUR / USA).
How to set the correct time on my VDO MS 4100 Car Receiver?
To set the correct time, set the correct time zone in the 'INITIALISATION – CLOCK SETTINGS' menu. If the RDS time signal transmitted by the selected station is incorrect, set 'GPS' in the 'INITIALISATION – CLOCK SETTINGS' menu.
Why can't I store an address in the address book of my VDO MS 4100?
If you cannot store an address in the address book, it is likely that the address book is full. Delete one or more entries that are no longer required.
Why does my VDO MS 4100 Car Receiver show 0 satellites on the info screen?
If the number of satellites displayed is 0, ensure that the GPS antenna is not covered by any objects. Also, if you are in a garage, car park, or tunnel, move the vehicle outdoors.
Why does my VDO MS 4100 system react slowly to entries or take a long time for calculation?
If the system reacts very slowly to entries or requires a long time for calculation, it may be because you are in a very densely digitized area. The system requires more time to read large quantities of data.
General| Brand | VDO |
|---|---|
| Model | MS 4100 |
| Category | Car Receiver |
| Language | English |
