open splicing function (the step only for #1 #2 #3 processor);
27.6. Press Setup key to enter Mosaic setup menu, press Brt+ or Brt- key to select
setup option, rotate OK to change parameter, press OK to save parameters
(the step only for #1 #2 #3 processor) ;
27.7. In menu the LED Total Width and LED Total Height must be as same as your
actual LED screen, at present the resolution of LED screen is 5120 x 1024;
27.8. In menu the Unit width and Unit height must be as same as the actual LED
screen the unit LVP615 connected;
27.9. After set these parameters of last two steps, press Brt+ or Brt- key to select
setup option E.8 Auto Calculation, press OK to calculate input parameters
Mosaic Input： DVI
In Status： 1080p
Input image Size： 1920 x 1080
Input image Start： ( 0, 0 )
--------------------------------------------------------------------
Mosaic Output Size： 1920 x 1080
Mosaic Output Start： ( 0, 0 )
Mosaic PIP: Off
--------------------------------------------------------------------
Device ID 1
E. Mosaic ( Video wall App)
--------------------------------------------------------------------
E.1 LED Total Width 3840
E.2 LED Total Height 2160
E.3 Unit Width 1920
E.4 Unit Height 1080
E.5 Unit H_Start 0
E.6 Unit V_Start 0
E.7 Sync. Mosaic Off
E.8 Auto Calculation OK to Apply
To Next Page
Loading...
