Vector TRA-F22 A Series - Page 3

TRA-F22x-A
GENERAL DESCRIPTION
Doc: 70-00-0958A V1.0, 20221102 © Vector Controls GmbH, Switzerland Page 3-34
Subject to change without notice www.vectorcontrols.com
VECTOR
1.3 Types and Ordering
Product Name
Product No.
Description / Type
Size / Length
Weight
Controller
TRA-F220-A
40-10-0274
Fan coil controller standalone
88 x 88 x 41 mm (3.5 x 3.5 x 1.6 inch)
168g
(5.92oz)
TRA-F221-A
40-10-0256
Fan coil controller with Modbus
88 x 88 x 41 mm (3.5 x 3.5 x 1.6 inch)
168g
(5.92oz)
Installation box (optional)
AMB-001
40-51-0009
Flush mounting installation box
80 x 80 x 40 mm (3.2 x 3.2 x 1.6 inch)
40g
(1.41oz)
AMB-005
40-51-0010
Surface mounting installation box
85 x 85 x 37 mm (3.4 x 3.4 x 1.5 inch)
46g
(1.62oz)
Passive temperature sensor with flying lead (NTC 10kΩ at 25 ºC (77 °F))
S-Tn10-2
40-200001
-
2 m (6 ft.) PVC cable
-
S-Tn10-6
40-200142
-
6 m (19 ft.) PVC cable
-
Passive temperature sensor for duct mounting (NTC 10kΩ at 25 ºC (77 °F))
SD-Tn10-12-2
40-200002
12 cm (4.7 inch) probe
2 m (6 ft.) PVC cable
-
SD-Tn10-20-2
40-200003
20 cm (7.8 inch) probe
2 m (6 ft.) PVC cable
-
SDB-Tn10-12-1
40-200124
12 cm (4.7 inch) probe
-
-
SDB-Tn10-20-1
40-200133
20 cm (7.8 inch) probe
-
-
Passive temperature sensor for contact mounting on pipes (NTC 10kΩ at 25 ºC (77 °F))
SC-Tn10-2
40-200095
-
2 m (6 ft.) PVC cable
-
SC-Tn10-6
40-200159
-
6 m (19 ft.) PVC cable
-
Passive temperature sensor for indoor mounting (NTC 10kΩ at 25 ºC (77 °F))
SRA-Tn10
40-200005
Indoor temperature sensor
88 x 88 x 21 mm
(3.5 x 3.5 x 0.8 inch)
-
Passive temperature sensor for outdoor mounting (NTC 10kΩ at 25 ºC (77 °F))
SOD-Tn10-1
40-200108
Outdoor temperature sensor
64 x 64 x 36 mm
(2.5 x 2.5 x 1.4 inch)
-
Additional sensors and accessories can be found on the Vector Controls home page www.vectorcontrols.com.