Veeco MS40 - Section 2: Operating the; Introduction

Operating The MS-40
2.1 Introduction
This chapter contains the information needed by the user to operate the
MS-40 Leak Detector and perform leak checks on a test object. This
chapter is grouped into three general sections:
1 Operator Controls & Indicators
2 Starting & Operating the Leak Detector
3 Testing Aids & Procedures
While this chapter contains sufficient information to operate the MS-40
leak detector, we suggest that you read Chapter 3, Theory of
Operation, prior to any actual testing. An overall understanding of
the various phases of a test cycle will help the operator use the leak
detector more effectively and efficiently.
Vacuum Instrument Corp.
2099 Ninth Avenue
Ronkonkoma, NY 11779
631.737.0900
1109-186-00 Rev. C 2-1