Veeder-Root PLLD User Manual

10
This alarm indicates a Low Pressure condition was detected
while dispensing. The low pressure threshold is programmable
from 0 - 25 psi (a low pressure threshold of 0 disables the low
pressure monitor).
Probable causes:
1. Large line leak (inspect visible areas of piping, dispensers,
and STP)
2. Tank is empty.
3. Low or no STP pressure (bad STP, starting capacitor).
4. Failed STP contactor relay.
5. Power to the STP is switched Off.
LOW PRESSURE ALARM

Veeder-Root PLLD Specifications

General

Brand	Veeder-Root
Model	PLLD
Category	Transducer
Language	English