Need help?Do you have a question about the Veeder-Root Stoneridge Tachograph Programmer and is the answer not in the manual?
General| Brand | Veeder-Root |
|---|---|
| Model | Stoneridge Tachograph Programmer |
| Category | Motherboard |
| Language | English |
Explains the core capabilities and functions of the tachograph programmer.
Lists the tachograph models the programmer can be used with.
Provides instructions on how to navigate and use the user manual effectively.
Details the software version supported by this user manual.
Discusses the internal rechargeable battery pack and its voltage.
Outlines the steps and precautions for charging the programmer's battery.
Identifies and describes the various connectors on the programmer unit.
Explains the different connection harnesses supplied and their uses.
Details the purpose and usage of each key on the programmer's keypad.
Guides users on how to switch the tachograph programmer on and off.
Provides an overview of the diagnostics menu and its purpose.
Explains the specific functions available within the diagnostics menu.
Details step-by-step procedures for operating the diagnostics menu functions.
Instructions on selecting the correct tachograph model for calibration or testing.
Guide to selecting the appropriate pulser type for specific tachograph models.
Instructions for selecting the sender type for VR2400 series tachographs.
Allows selection of the tachograph type for calibration or testing.
Enables selection of pulser or sender type for specific tachographs.
Determines the W-factor using a vehicle on a rolling road.
Determines the W-factor using a 20m physical distance track.
Determines W-factor using a 20m track with a Flexi-Switch.
Assists in semi-automatic tachograph bench testing.
Injects speed pulses to test tachograph speed display and warnings.
Finds the Pulse Per Engine Rev from the alternator or revs sender.
Checks the accuracy of the tachograph's internal clock.
Manages tachograph modes, memory reset, and sender pairing.
Interrogates tachograph to determine system supplier and versions.
Displays and erases Diagnostic Trouble Codes from the tachograph.
Interrogates, modifies, and programs tachograph data via K-line.
Selects settings like Ignition Recording and Overspeed for specific tachographs.
Measures the current K-factor set on tachographs.
Calculates DIL switch settings for a valid K-factor.
Allows reading and modification of tachograph time and date.
Pairs a sender and performs tests on the tachograph.
Procedure for entering the PIN code to enable calibration mode.
Overview of methods for determining the vehicle's W-factor.
Details the rolling road procedure for W-factor determination.
Explains the fixed distance test using a 20m track.
Explains the fixed distance test using a 20m track with a Flexi-Switch.
To Next Page