Document No. 6957-193 June 2006 Revision 2.3 ©Copyright Stoneridge Electronics Ltd
Manufacturers of VEEDER-ROOT Tachographs
13
2.9 Selection of SENDER TYPE (Stoneridge VR2400)
For Stoneridge VR2400 series tachographs, the sender type
may be selected.
With the Programmer at the VR2400 MAIN MENU and displaying PULSER SELECT, connect a
Cable U between the Programmers’ Socket ‘C’ and the 2400 Tachograph and then press ENTER.
Use the ← or → keys to scroll through the options until the preferred sender type is displayed.
Press ENTER and again to confirm the selection. The four choices available for sender Type are:
Encrypted, 4-Wire, 3-Wire and Magnetic.
Please note that for all other Tachograph types no sender type is selectable.
VR2400 MAIN MENU
:PULSER SELECT
SENDER TYPE
: Encrypted ←
←←
← →
→→
→
To Next Page
Loading...
Need help?
General