Document No. 6957-193 June 2006 Revision 2.3 ©Copyright Stoneridge Electronics Ltd
Manufacturers of VEEDER-ROOT Tachographs
5
Chapter 3: MAIN MENU PROGRAMMER FUNCTIONS
Briefly describes the functions performed by the Programmer. A quick-reference Table (Table 1)
lists the functions available for each Tachograph type and the harnesses that are required for each
Programmer function.
Chapter 4: FUNCTION DESCRIPTIONS AND DETAILS OF TEST PROCEDURES
This gives a more detailed description of the different functions available in the Tachograph
Programmer and provides Step-by-step procedures for carrying out the various Tachograph tests
and functions.
Chapter 5: PROGRAMMING A TACHOGRAPH
Once the various Tachograph parameters have been determined (using the Tests described
previously), the values determined must be sent to the Tachograph so that it can be updated with
the correct parameter values.
1.4 What version of Tachograph Programmer Software does this Manual Support ?
This manual covers the Tachograph Programmer functionality for Software version Rev2.03. The
determination of the current Software Version in a Tachograph Programmer is described in
section 2.6 (Diagnostics Menu – ROM Test).
A Tachograph Programmer with an older version of Software can be upgraded to the current
version (i.e., version Rev2.03). For further information on programmer software upgrades, please
contact Stoneridge via E-mail at “sales@elc.stoneridge.com”.
A Programmer upgrade is done using a Standard PC running a dedicated installation Program
which is available on a Programmer Upgrade CD.
The PC (Serial Communications Port) is connected to the Programmer (Socket D on Figure 1) via
a Field Download Cable (Part Number: 7780-953).
To Next Page
Loading...