Veeder-Root TLS-450 - Preparing the TLS-450 Console for Upgrade; Removing the Display Door; Figure 5. Opening the TLS-450 Console Doors

6
Preparing The TLS-450 Console For Upgrade
Removing The Display Door
1. Turn off, tag and lockout the breaker that supplies power to the console.
2. Open both doors to the left (see Figure 5).
Figure 5. Opening The TLS-450 Console Doors
LEGEND FOR NUMBERED BOXES IN Figure 5
1. Left (Printer) door
2. Using a T-15 Torx driver, remove the top and bottom screws
securing left door and swing door to left.
3. Right (Display) door.
4. Using a T-15 Torx driver, remove the top and bottom screws
securing left door and swing door to left.
OFF
1 2 4
2 4
954-1.eps
3