Need help?Do you have a question about the Veeder-Root Gilbarco EMC Series and is the answer not in the manual?
General| Brand | Veeder-Root |
|---|---|
| Model | Gilbarco EMC Series |
| Category | Music Mixer |
| Language | English |
Highlights safety symbols and provides essential precautions for handling electrical and flammable materials.
Outlines NEC requirements for electrical equipment and wiring in hazardous locations, referencing relevant NFPA standards.
Covers critical safety aspects for probe and sensor wiring, including wire type, length, and conduit requirements.
Provides guidelines for selecting a suitable mounting location and securely mounting the console, considering weight and environment.
Details how to wire AC power to the console, including power rating verification and ground connection checks for safety.
Addresses safety concerns related to routing power, communication, and intrinsically safe wiring through conduits to the console.
Provides step-by-step instructions for installing Mag Probes into dedicated risers in UST/AST tanks.
Details the process for installing Mag Probes in vapor extractor risers, covering both with and without coupling adapter scenarios.
Outlines the installation procedure for the Chem-ISO Mag Probe, including float attachment and tube installation.
Describes the installation process for the LPG-ISO Mag Probe in LPG tanks, covering float attachment and tube installation.
Details procedures for sealing probe/sensor connections using epoxy sealant for rigid conduit and direct burial cable methods.
Provides detailed instructions for wiring probes and sensors to TLS-300/ProPlus/EMC Basic consoles, including precautions and circuit directory use.
To Next Page
