Thank you for choosing the VeeCAN 128 display.
These pages provide a brief introduction to the VeeCAN 128 display,
but more importantly the recommended installation instructions. This
display comes installed with Veethree Engine Monitor (VEM) software
which displays J1939-compatible engine/transmission data. Please
read through the guide before use.
The VEM software creates graphical instrument clusters to display
parameters and alarms - providing users with a timesaving solution
for introducing equipment incorporating higher degrees of electronic
display.
We hope that you will be pleased with this product and that you will
have many years of trouble free operation. If you have any problems or
ideas for improvement then we would like to hear from you.
www.v3instruments.com
Introduction
™
™
To Next Page
Loading...
General