Vega VEGAPULS C 11 User Manual

10
3 Product description
VEGAPULS C 11 • Two-wire 4 … 20 mA
58340-EN-200806
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
•
Storage and transport temperature see chapter " Supplement -
Technical data - Ambient conditions"
•
Relative humidity 20 … 85 %
3.5 Accessories
Screwedangesareavailableindierentversionsaccordingtothe
following standards: DIN 2501, EN 1092-1, BS 10, ASME B 16.5,
JIS B 2210-1984, GOST 12821-80.
Welded sockets are used to connect the devices to the process.
Threaded adapters enable simple adaptation of devices with stand-
ardthreadedttings,e.g.toprocess-sidehygieneconnections.
The mounting accessories are used for stable mounting of the device
at the measuring point. The parts are available in various versions and
sizes.
Transport inspection
Storage
Storage and tr
ansport
temperature
Flanges
Welded sockets and
adapters
Mounting accessories

Vega VEGAPULS C 11 Specifications

General

Brand	Vega
Model	VEGAPULS C 11
Category	Security Sensors
Language	English