Need help?Do you have a question about the Vega VEGASWING 51 and is the answer not in the manual?
Provides information for mounting, connection, setup, maintenance, and safety of the instrument.
Manual is for trained personnel; contents must be made available and implemented by qualified personnel.
Explains symbols for Document ID, information, notes, cautions, warnings, danger, Ex applications, lists, and disposal.
Operations must be carried out by trained, qualified, and authorized personnel. PPE must be worn.
The VEGASWING 51 is for point level detection in liquids. Operational reliability depends on correct usage.
Incorrect use can lead to application-specific hazards, vessel overfill, damage, or impaired protective characteristics.
Instrument must be operated in a flawless condition. Operator is responsible for trouble-free operation and safety measures.
Safety approval markings and safety tips on the device must be observed.
Device complies with applicable legal requirements and directives. Declarations can be found on homepage.
Specific information for USA and Canada, referencing electrical codes.
Instructions to observe environmental management system and protection of the environment.
Lists the scope of delivery including the level switch, test magnet, and documentation.
Describes the VEGASWING 51 as a point level sensor with a tuning fork for industrial liquids.
Explains how to check switching status via the signal lamp and detection capabilities based on density.
Details the special cleaning procedure for oil, grease, and silicone-free versions.
Provides guidelines for packaging, transport inspection, storage conditions, and temperature requirements.
Emphasizes operating within permissible process conditions and suitability of instrument parts for the environment.
Details mounting for threaded versions, welded sockets, and handling precautions.
Safety instructions for electrical connection and guidance on selecting connection cables and cable glands.
Overview of connection versions (M12, ISO 4400) and plug types, with details on cable requirements.
Explains the meaning of signal lamps (LEDs) for voltage supply, covering, function test, shortcircuit, and errors.
Describes how to use a test magnet to simulate the output signal and troubleshoot if no switching occurs.
Provides an overview of switching conditions based on level, operating mode, and signal lamp indications.
States no special maintenance is required for normal operation, but cleaning is recommended for visibility.
Discusses causes of malfunction and initial steps for fault rectification, including a 24-hour service hotline.
Outlines the procedure for instrument repair, including filling out forms, cleaning, and contacting the agency.
Warns about dangerous process conditions during dismounting and advises following mounting steps in reverse.
Instructs to pass the instrument to a specialized recycling company and handle batteries and data separately.
Lists general data, materials for wetted and non-wetted parts, plug connectors, process fittings, and weight.
Provides detailed dimensional drawings for the standard version with various threaded fittings and plug connections.
States that VEGA product lines are globally protected by industrial property rights.
Clarifies that brands, trade, and company names are property of their lawful proprietors.
To Next Page
General
