Need help?Do you have a question about the Vega VEGASWING 63 and is the answer not in the manual?
Explains the purpose and scope of the operating instructions manual.
Identifies the manual as being directed to trained personnel.
Defines symbols used in the manual for warnings, notes, and actions.
Specifies that only trained and authorized personnel should operate the device.
Defines the VEGASWING 63 as a point level sensor for liquids.
Warns about risks associated with improper or incorrect use of the instrument.
Outlines general safety instructions and operator responsibilities.
Instructs to observe safety approval markings and tips on the device.
Confirms device compliance with applicable EU directives.
States compliance with safety standards for relevant applications.
Provides installation and operation information specific to USA and Canada.
Highlights the need to follow specific safety instructions for Ex applications.
Details environmental instructions related to packaging, transport, and disposal.
Lists the items included in the scope of delivery.
Explains how the VEGASWING 63 sensor works, including function monitoring.
Describes how to check and adjust the switching condition of the device.
Provides instructions for proper storage and transport of the instrument.
Lists available accessories such as flanges and electronics modules.
Provides general guidelines for selecting suitable process and ambient conditions.
Details mounting instructions for welded sockets, adhesive products, and inflow.
Safety notes and requirements before connecting the device to power.
Step-by-step guide for connecting the instrument.
Illustrates the wiring for single chamber housing versions.
Shows wiring for IP 66/IP 68, 1 bar protected versions.
Overview of setup checks and adjustment elements.
Details the control lamp and DIL switch for density adjustment.
Table explaining switching conditions based on mode and level.
Describes methods for performing proof tests for WHG and SIL compliance.
States that no special maintenance is required for proper operation.
Guidance on identifying and rectifying common faults.
Instructions for replacing the electronic module.
Steps to follow when an instrument needs to be sent for repair.
Provides instructions on how to safely remove the instrument.
Guidelines for environmentally sound disposal and recycling.
Comprehensive list of technical specifications and materials.
Provides physical dimensions for various housing versions.
Information regarding VEGA's protected product lines.
Statement about the ownership of brands and trade names.
Explains the purpose and scope of the operating instructions manual.
Identifies the manual as being directed to trained personnel.
Defines symbols used in the manual for warnings, notes, and actions.
Specifies that only trained and authorized personnel should operate the device.
Defines the VEGASWING 63 as a point level sensor for liquids.
Warns about risks associated with improper or incorrect use of the instrument.
Outlines general safety instructions and operator responsibilities.
Instructs to observe safety approval markings and tips on the device.
Confirms device compliance with applicable EU directives.
States compliance with safety standards for relevant applications.
Provides installation and operation information specific to USA and Canada.
Highlights the need to follow specific safety instructions for Ex applications.
Details environmental instructions related to packaging, transport, and disposal.
Lists the items included in the scope of delivery.
Explains how the VEGASWING 63 sensor works, including function monitoring.
Describes how to check and adjust the switching condition of the device.
Provides instructions for proper storage and transport of the instrument.
Lists available accessories such as flanges and electronics modules.
Provides general guidelines for selecting suitable process and ambient conditions.
Details mounting instructions for welded sockets, adhesive products, and inflow.
Safety notes and requirements before connecting the device to power.
Step-by-step guide for connecting the instrument.
Illustrates the wiring for single chamber housing versions.
Shows wiring for IP 66/IP 68, 1 bar protected versions.
Overview of setup checks and adjustment elements.
Details the control lamp and DIL switch for density adjustment.
Table explaining switching conditions based on mode and level.
Describes methods for performing proof tests for WHG and SIL compliance.
States that no special maintenance is required for proper operation.
Guidance on identifying and rectifying common faults.
Instructions for replacing the electronic module.
Steps to follow when an instrument needs to be sent for repair.
Provides instructions on how to safely remove the instrument.
Guidelines for environmentally sound disposal and recycling.
Comprehensive list of technical specifications and materials.
Provides physical dimensions for various housing versions.
Information regarding VEGA's protected product lines.
Statement about the ownership of brands and trade names.
To Next Page
General
