Need help?Do you have a question about the Veichi AC100 series and is the answer not in the manual?
General| Cooling Method | Forced air cooling |
|---|---|
| Output Voltage | 0~Input Voltage |
| Control Mode | Sensorless Vector Control (SVC) |
| Frequency Range | 0~600Hz |
| Overload Capacity | 150% for 60 seconds |
| Communication | Modbus |
| Protection Features | Overvoltage, Undervoltage, Overcurrent, Overload, Overtemperature, Short Circuit |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20℃~60℃ |
| Humidity | 0~95%, no condensation |
| Altitude | Below 1000m (derating required above 1000m) |
Specifications detailing the technical parameters and criteria of the inverter.
Various considerations for reliable and safe operation of the product by users during installation.
Notices and requirements related to the physical installation of the inverter, including orientation and space.
Crucial safety instructions for electrical installation, handling live circuits, grounding, and wiring practices.
Essential safety guidelines to follow before and during basic operation and trial runs.
Categorization of inverter faults and the actions taken by the inverter when they occur.
Table detailing fault codes, possible causes, and corresponding treatment measures for quick diagnosis.
Flowcharts guiding the diagnosis process for system faults, over-current, over-voltage, and other issues.
Safety rules to be followed during inspection and maintenance operations to prevent hazards.
Safety precautions to be followed when using peripherals and optional accessories with the inverter.
Details on basic control modes, run command channels, and frequency selection parameters.
Parameters related to start-up modes, braking, speed tracking, and stop modes for controlling inverter operation.
Configuration of motor parameters, including type, rating, and self-tuning options for optimal performance.
To Next Page