Do you have a question about the Veichi SI23-D1 series and is the answer not in the manual?
Cooling Method | Forced air cooling |
---|---|
Enclosure Rating | IP20 |
Input Frequency | 50/60Hz |
Control Mode | V/F |
Overload Capacity | 150% for 60 seconds |
Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheating, Short circuit |
Communication | Modbus RTU |
Ambient Temperature | -10°C to +40°C |
Storage Temperature | -20°C to +60°C |
Humidity | Less than 95% (non-condensing) |
Altitude | Below 1000m |
Defines "Danger" and "Caution" for safety warnings.
Outlines safety requirements for installation, wiring, and operation.
Provides overall and installation dimensions for various inverter models.
Visual layout of the inverter's keyboard and display.
Explains the function of each key on the inverter's keyboard.
Lists fault codes, types, possible reasons, and troubleshooting steps.
Details of basic operational parameters for the inverter.
Guidance for wiring, parameter setting, and troubleshooting for asynchronous motors.
Guidance for wiring, parameter setting, and troubleshooting for synchronous motors.
Details on sleep, protection functions, and special features for PV water pumps.