201-00-Lock-TK001-V2
• Protect your User Codes and Master Code.
• Restrict access to your lock’s interior assembly and routinely check your
settings to ensure they have not been altered without your knowledge.
• Do not use an electric screwdriver during installation.
• This manufacturer advises that no lock can provide complete security by
itself.
• This lock may be defeated by forcible or technical means, or evaded by
entry elsewhere on the property.
• No lock can substitute for caution, awareness of your environment, and
common sense.
• Care should be taken to ensure a long-lasting finish. When cleaning is
required use a soft, damp cloth. Using lacquer thinner, caustic soaps,
abrasive cleaners or polishes could damage the coating and result in
tarnishing.
• The lock is water resistant. It can withstand water splashes; however, do
not let water and liquids get into the lock.
• Avoid exposure to direct sunlight. Long-term exposure to direct sunlight
may damage the lock.
Information & Safety Warnings
To Next Page
Loading...