What to do if my Velex VX163 Receiver won't turn on?
If your Velex Receiver is not turning on, it could be due to several reasons: * The yellow or red wire may not be connected properly or have incorrect voltage. Check these connections to ensure they have the correct voltage (11-16V DC). * The black wire might not be connected. Ensure it is properly connected to the ground. * The fuse may be blown. If so, replace the fuse.
Why does my Velex VX163 have power but no sound?
If your Velex Receiver has power but no sound, the issue might be with the speaker wires. * Check the connections at the speakers to ensure the speaker wire is connected. * One or more speaker wires might be touching each other or the chassis ground. Insulate all bare speaker wires from each other and the chassis ground.
What causes a Velex VX163 Receiver to blow fuses?
A Velex Receiver might be blowing fuses due to: * The yellow or red wire touching the chassis ground. Check for any pinched wires. * Speaker wires touching the chassis ground. Inspect for pinched wires here as well. * Using an incorrect fuse rating. Make sure you are using a fuse with the correct rating.
Crucial preparation steps including battery disconnection and avoiding environmental hazards.
Instructions for drilling a hole and securing the stereo using the mounting bracket.
Step-by-step guide for physically installing the radio unit onto the dashboard.
How to adjust audio settings like EQ, bass, treble, and balance via the SEL button.
How to access and modify system settings such as beep, reset, about, and time.
Guide to setting tuner functions like auto store, manual store, and area selection.
General| Bluetooth | Yes |
|---|---|
| USB | Yes |
| AUX | Yes |
| Voltage | 12V |
| Power Supply | DC 12V |
| Type | Receiver |
| Radio Tuner | FM |
To Next Page
