EasyManua.ls Logo

Velex VX163 - DAB Operation (available for VX163 D only); Specifications

Velex VX163
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DAB Operation (available for VX163D only)
Note: DAB+ ( Digital Audio Broadcasting) is only available for some European countries and Australia where has
the Digital Radio Broadcasting.
Press SRC button to switch to DAB+ mode, VX163D will automatically scan for
local digital stations. This process may take a few seconds depending on the
numbers of available stations. As DAB+ stations are found, they will be automatically
stored into the DAB+ band memories. Once scanning is complete, VX163D will
begin playing the station stored in the first memory location. And the station will
be displayed on the screen.
Tuning DAB+ stations
Press I<< or >>I button to tune to previous / next DAB+ station.
A – STORE: Long press BAND button for automatically scan and save the
stations.
Specifications
General
Power supply requirements: DC 12V Negative Ground
Load impedance: 4-8 Ohms/channel
Maximum output power: 40W x 4 (CH)
Operate temperature: -10-50
FM Tuner: Tuning range: 87.9MHz-107.9MHz (USA)
87.5MHz-108MHZ (EUR)
AM Tuner: Tuning range: 530KHz-1710 KHz (USA)
522KHz-1620 KHz (EUR)
DAB+ (VX150D only) Tuning Range: BAND III 174-240 Mhz
USB playback
Signal to Noise Ratio: 55dB
Frequency Response: 50Hz- 20KHz
A/D Conversion Filter: 16BIT
USB Storage Capacity: 16GB Max
Bluetooth
Version: 3.0
*Note: Specification may change without notice.

Related product manuals