Velleman DVM851 - 9.1 DC VOLTAGE; DC Voltage Measurement Specifications

DVM851
V. 03 – 23/10/2015 9 ©Velleman nv
Specifications
This device is not calibrated when purchased!
Regulations concerning environment of use:
 Use this meter only for measurements in CAT 1 and CAT 2
environments (see §7)
 Use this meter only in a pollution degree 2 environment (see §8)
Ideal working conditions include:
 temperature: 18 to 28°C (64°F to 82°F)
 relative humidity: max. 80%
 altitude: max. 2000m (6560ft)
Voltage
max. 600V
Fuse protection
F 500mA/600V, F10A/600V
Power
9V alkaline battery 6LR61
Display
LCD, 1999 counts
sampling rate
2-3/sec.
Measuring method
Dual-slope integration A/D
converter
Overrange indication
Only figure "1" on the display
Polarity indication
"-" displayed for negative
polarity
Operating temperature
0 to 40°C
Storage temperature
-10°C to 50°C
Low battery indication
appears on the display
Dimensions
138 x 69 x 31mm
Weight
Approx. 142g
9.1 DC VOLTAGE
Do not measure circuits that may contain voltages > 600V
Range
Resolution
Accuracy
200mV
100µV
0.5% of rdg  2 digits
2V
1mV
0.8% of rdg  2 digits
20V
10mV
200V
100mV
600V
1V
1.0% of rdg  2 digits