Need help?Do you have a question about the Velleman K8015 and is the answer not in the manual?
Introduces the Multifunction Relay Switch K8015, highlighting its 14 diverse functions.
Lists features like multiple functions, programmable delays, EEPROM, and transient filter for the relay.
Outlines operating voltages, maximum load capacity, and PCB dimensions of the relay switch.
Specifies necessary tools such as soldering iron, cutters, pliers, and screwdrivers for building the kit.
Provides advice on skill matching, instruction adherence, component placement, and progress tracking.
Details proper soldering techniques, ensuring good joints, and correct lead trimming for reliability.
Guides the installation of diodes, resistors, ICs, capacitors, LEDs, transistors, VDRs, and terminal blocks.
Explains momentary, toggle, start/stop, staircase, and dual-time staircase timer operations.
Covers non-retriggerable, turn-on/off delay, interval, and blinking timer modes for versatile control.
Describes blinking with timer, random timer, trigger-at-release, and interruptible staircase timer functions.
Details how to set custom delay times (delay1 and delay2) for various timer functions.
Illustrates the wiring for connecting the relay switch to a 12V DC power source.
Shows how to connect the relay switch using AC mains voltage adapters.
Provides the physical component layout of the PCB and the complete electronic circuit schematic.
Introduces the Multifunction Relay Switch K8015, highlighting its 14 diverse functions.
Lists features like multiple functions, programmable delays, EEPROM, and transient filter for the relay.
Outlines operating voltages, maximum load capacity, and PCB dimensions of the relay switch.
Specifies necessary tools such as soldering iron, cutters, pliers, and screwdrivers for building the kit.
Provides advice on skill matching, instruction adherence, component placement, and progress tracking.
Details proper soldering techniques, ensuring good joints, and correct lead trimming for reliability.
Guides the installation of diodes, resistors, ICs, capacitors, LEDs, transistors, VDRs, and terminal blocks.
Explains momentary, toggle, start/stop, staircase, and dual-time staircase timer operations.
Covers non-retriggerable, turn-on/off delay, interval, and blinking timer modes for versatile control.
Describes blinking with timer, random timer, trigger-at-release, and interruptible staircase timer functions.
Details how to set custom delay times (delay1 and delay2) for various timer functions.
Illustrates the wiring for connecting the relay switch to a 12V DC power source.
Shows how to connect the relay switch using AC mains voltage adapters.
Provides the physical component layout of the PCB and the complete electronic circuit schematic.
To Next Page
General